Track Handles
***AS OF 8/6/23, Track Nuts are NOT included***
Need a hand? These Track Handles utilize the 10-32 Go Fast Camper or 10-32 T-Slot nuts for Super Pacific rails to provide a stable grabbing point on the sides of your Go Fast Camper/Super Pacific via the T-Track mounts.
1. Won't void your Go Fast Camper warranty/Super Pacific
2. Be removable
3. Avoid any potential water intrusion from drilling
4. Includes Washers and 10-32x1" Bolts. *Track Nuts Not Included*
These handles are likely more expensive than ones you may be able to find on Amazon (I cant compete with Amazon). PA12-CF is a Carbon Fiber filled Nylon that is extremely strong and extremely weather resistant. The handle in PA12-CF can easily hold me (200lbs) standing directly on top of it with no noticeable flex or deflection. It is NOT a cheap material, as it's an industrial filament.
The PETG version of the handle should be more than adequate for the majority of people, and still retains great strength as well as weather resistance.
Please note that if you order the PA12-CF (Carbon Fiber Nylon), the only color option that it will come in is Black (more of a charcoal'ish color). The color of the handle may have slight inconsistencies due to the nature of the material, and will have a slight sandpaper feel to it. These handles can be sanded and painted if you wish.
Install:
-----------Align the your track nuts (threaded onto the included bolts) into the track channel. Looking at one side at a time, tighten the bolt by a half turn until the Track Nut has gone vertical. Do that with both sides, then pull out on the handle confirming that the nuts are grabbing the rail. Continue pulling while tightening the bolts until they're snug. Please do NOT over tighten, there is no need to wrench them down. Go until you feel resistance, and then half a turn more.
***AS OF 8/6/23, Track Nuts are NOT included***
Need a hand? These Track Handles utilize the 10-32 Go Fast Camper or 10-32 T-Slot nuts for Super Pacific rails to provide a stable grabbing point on the sides of your Go Fast Camper/Super Pacific via the T-Track mounts.
1. Won't void your Go Fast Camper warranty/Super Pacific
2. Be removable
3. Avoid any potential water intrusion from drilling
4. Includes Washers and 10-32x1" Bolts. *Track Nuts Not Included*
These handles are likely more expensive than ones you may be able to find on Amazon (I cant compete with Amazon). PA12-CF is a Carbon Fiber filled Nylon that is extremely strong and extremely weather resistant. The handle in PA12-CF can easily hold me (200lbs) standing directly on top of it with no noticeable flex or deflection. It is NOT a cheap material, as it's an industrial filament.
The PETG version of the handle should be more than adequate for the majority of people, and still retains great strength as well as weather resistance.
Please note that if you order the PA12-CF (Carbon Fiber Nylon), the only color option that it will come in is Black (more of a charcoal'ish color). The color of the handle may have slight inconsistencies due to the nature of the material, and will have a slight sandpaper feel to it. These handles can be sanded and painted if you wish.
Install:
-----------Align the your track nuts (threaded onto the included bolts) into the track channel. Looking at one side at a time, tighten the bolt by a half turn until the Track Nut has gone vertical. Do that with both sides, then pull out on the handle confirming that the nuts are grabbing the rail. Continue pulling while tightening the bolts until they're snug. Please do NOT over tighten, there is no need to wrench them down. Go until you feel resistance, and then half a turn more.
***AS OF 8/6/23, Track Nuts are NOT included***
Need a hand? These Track Handles utilize the 10-32 Go Fast Camper or 10-32 T-Slot nuts for Super Pacific rails to provide a stable grabbing point on the sides of your Go Fast Camper/Super Pacific via the T-Track mounts.
1. Won't void your Go Fast Camper warranty/Super Pacific
2. Be removable
3. Avoid any potential water intrusion from drilling
4. Includes Washers and 10-32x1" Bolts. *Track Nuts Not Included*
These handles are likely more expensive than ones you may be able to find on Amazon (I cant compete with Amazon). PA12-CF is a Carbon Fiber filled Nylon that is extremely strong and extremely weather resistant. The handle in PA12-CF can easily hold me (200lbs) standing directly on top of it with no noticeable flex or deflection. It is NOT a cheap material, as it's an industrial filament.
The PETG version of the handle should be more than adequate for the majority of people, and still retains great strength as well as weather resistance.
Please note that if you order the PA12-CF (Carbon Fiber Nylon), the only color option that it will come in is Black (more of a charcoal'ish color). The color of the handle may have slight inconsistencies due to the nature of the material, and will have a slight sandpaper feel to it. These handles can be sanded and painted if you wish.
Install:
-----------Align the your track nuts (threaded onto the included bolts) into the track channel. Looking at one side at a time, tighten the bolt by a half turn until the Track Nut has gone vertical. Do that with both sides, then pull out on the handle confirming that the nuts are grabbing the rail. Continue pulling while tightening the bolts until they're snug. Please do NOT over tighten, there is no need to wrench them down. Go until you feel resistance, and then half a turn more.
